Handset JCHT35K55C
The JCHT35K55C hand control has a display for reading height in either centimeters or inches.
The screen turns off when it is not used for about 10 seconds, which saves power in standby mode.
As an additional feature, the JCHT35K55C handheld has four memory buttons to remember the different heights you want clearly.
JCHT35K55C is included in the JC35TS-RS3 package.
Up / Down driving
Memory slots (4pcs)
Color: Black
Cable length: 2000mm with 8-pin crystal plug
LED display at actual height
Compatible with: JCB35N1, JCB35N2, JCB35N3, JCB35N4
Press and hold the DOWN button until the table reaches its lowest height. Release the DOWN button. Press and hold the DOWN button again until the LED display reads "RST". Release the DOWN button. Your desktop is now ready to use.
If your desktop is not working properly, you may need to reset it. If your table has a hand control with an LED display and "RST", perform a reset procedure if the frame only moves down.
If an error message ('' E01-E013 '') appears on the LED display, make sure all wired connections are securely connected (feet to cables, cables to control box). Then perform a reset operation.
If the error message persists after resetting, contact your dealer.
If "HOT" is displayed, allow the frame to cool for 20 minutes.