Flip-Top is a 2-in-1 electric table frame with a tabletop that can be flipped upright. The frame has a compact design, and the castors under the feet make the table easy to move. Turning the knob on the tilt joint releases the tabletop for flipping and locks it in the selected position, horizontal or vertical.
The height adjustment range is 720–1370 mm and the height adjustment speed is 32 mm/s. The handset’s up/down buttons are at the end of the tabletop, and the power switch and USB-A port are on the long side. A net under the tabletop keeps cables organised and out of sight. A battery power source can be connected to the frame, which reduces placement restrictions. The matching Flip-Top tabletop 160 x 80 cm is a good choice, as its whiteboard laminate surface also works as a writing surface.
The tabletop and battery are not included as standard.
Features
Flip-up tabletop: The knob on the tilt joint locks the tabletop in a horizontal or vertical position.
Easy to move: Two castors under each foot.
Two motors: One in each lifting column.
Handset at the end of the tabletop: Up/down buttons.
Power switch and USB-A port on the long side of the tabletop.
Cable net: A net under the tabletop keeps cables organised and out of sight.
Battery power source: A battery can be connected to the frame (not included as standard).
Whiteboard tabletop available: The Flip-Top tabletop 160 x 80 cm also works as a writing surface.
Anti-collision protection.
Warranty: 5 years
Technical information
Height adjustment range: 720–1370 mm
Height adjustment speed: 32 mm/s
Frame width: 1500 mm
Width at castors: 1408 mm
Foot part: 620 mm
Side bracket: 600 mm
Lifting column: round, 3-stage, 70 mm
Lift capacity: 80 kg
Motors: 2
Tabletop positions: horizontal and vertical
Handset: JCHT35K24B, up/down buttons
USB-A port
Anti-collision protection: yes
Noise level: <50 dB
Power consumption: 190 W
Duty cycle: 10% (max. 2 min of use followed by an 18 min break)
